proedirect
Paste Backfill Diverter Valve
key features
Valve Sizes: 4”, 6” & 8”
Pressure ratings to suit 20 thru to 250 Bar systems
60.0° degree Y pattern design to minimise change of direction and potential wear problems
Smooth passages for unrestricted flow and low frictional losses
Valve can be operated at full line or pump pressure avoiding the need to disconnect pipework and or shut down the system to operate
Simple geared electric or manual gear operators
application
Primary purpose is for flow diversion of paste or tailings in both above ground and below ground reticulation systems, but can also be used in any high pressure abrasive slurry system to divert flow from one pipeline to another without costly and continual pipework disconnection and reconnection to change diversion of flow.
Depending on the direction the valve is installed, it can be easily switched between a Diverter Valve to a Switching Valve simply by installing in reverse.
specifications
item/description | description |
|---|---|
Body Design | 60° Y Pattern Outlet Piston Valve |
Construction Type | Forged Body |
Design Codes | ASME B16.34, ISO EN12516 |
Testing Specification | API 598 & ISO EN12266 |
Certificate of Compliance | PED 97/23/EC |
Operator Type | Pneumatic – Double Acting |
Stem | High Strength – Anti-Blowout Design |
Piston | 316SS + TC – Min. 150μm Thickness |
item/description | description |
|---|---|
Valve Size Range | 4.0” / DN100 |
Working Pressure (max) | 100, 150 & 250 Bar Designs |
Pipe Connection | RF & RTJ Flanged or Victaulic |
Mounting Spool NB Sizes | 100, 125, 150, 200 & 250 |
Mounting Spool Pipe Schedule | 80, XS, 120, 160 & XXS |
Mounting Spool Pad Flange | 4.0” ANSI 600# / 900# / 1500# |
Mounting Spool Length | 500 (mm) or 750 (mm) |
Dump Flow Rate (max). | 100NB @ 14.3 ℓ/sec |
contact us
LET US FIND THE SOLUTION FOR YOU
Whether planning a new project or looking to upgrade your current flow system, get in touch to discuss the best possible solution for your current process.
